USB-C to USB-A Round Panel Mounter

¥1,180

Neutrik, which is commonly used in DIY fight stick kits, uses a USB-B printer cable to connect to the fight stick itself.This mounter eliminates this problem and allows you to...

USB 2.0 A to B Cable 25cm

¥280

This is a USB2.0 compatible A to B cable. It is used to connect the Brook Fighting Bord to a USB mounting jack or Neutrik. It is 25cm long, just...

Artwork Print & Cut / Hori Fighting Stick α

¥1,980¥2,960

High resolution, high definition print Artwork print is printed using the finest professional printer.Provides vivid and professional quality artwork replication.The printer is 1,440 dpi resolution, and a 9-color pigment ink...

Artwork Print & Cut / Qanba Obsidian

¥1,980¥2,960

An Acrylic Top Panel is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be usedThis itemPlease purchase...

Dust Washer 36mm Clear

¥100

It is a dust washer that attaches to a lever made of acrylic.It is recommended for those who have illustrations attached to the top plate of Akecon!The size of the...

HORI Fighting Edge Acrylic Top Panel

¥2,500

HORI Fighting Edge for PlayStation4This is the acrylic top panel that is designed for use in the kitchen.PLEASE NOTE THAT IT IS NOT AVAILABLE ON THE XBOX VERSION. In order...

HORI RAP V Acrylic Top Panel

¥2,300

HORI RAP VIt will be an acrylic top designed for use.Please note that RAP4 KAI RAP V for Switch is not available. This item is required to take advantage of...

RAZER PANTHERA Acrylic Top Panel

¥2,300

It becomes an acrylic top designed for Razer Panthera. To use the printed artwork, we need this item.The original artwork must be peeled off. Precision cutting by laser cutting Acrylic...

HORI RAP N Acrylic Top Panel

¥2,300

This acrylic top panel is designed for HORI RAP N. To use the printed artwork, you will need this product. To replace it, you need to remove the original artwork....

Artwork Print & Cut / Qanba Obsidian Pearl

¥1,980¥2,960

An Acrylic Top Panel is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be used This item...

Artwork Print & Cut / Hitbox

¥1,980¥2,960

An Acrylic Top Panel is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be usedThis itemYou also...

HitBox Acrylic Top Panel

¥2,300

It will be an acrylic top panel designed for HITBOX. This item is required to take advantage of the printed artwork.To replace it, you need to remove the original acrylic...

Artwork Print & Cut / Hori Fighting Edge (PS4)

¥2,280¥3,280

An Acrylic Top Panel is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be used This item...

Artwork Print & Cut / Hori Rap V

¥1,980¥2,960

An Acrylic Top is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be used This item Please...

20pin Joystick / Button Harness

¥1,400

Max Qty : 3units

Qanba Obsidian Perl Acrylic Top Panel

¥2,700

It will be an acrylic top panel designed for Qanba Obsidian Perl. To use the printed artwork, you will need this item.To replace, you need to remove the original acrylic...

Artwork Print & Cut / Hori Rap N

¥1,980¥2,960

An Acrylic Top Panel is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be usedThis itemPlease purchase...

UFB-UP5 Mount

¥800

Broook Universal Fighting Board, produced by acrylicIt is a dedicated mounter to replace UFB-UP5 and install it to FightStick. Contents UFB-UP5 Acrylic Mounter Body M3 disc screw 40 mm x2...

[Assembled] ZERO TWO STICKLESS [All-Button] Bundle

¥26,405¥43,151

Do not add this product to your cart. Please visit the bundle page to edit. This is a dummy product and must not be deleted or altered. Dummy products are...

Artwork Print & Cut / ZERO TWO STICKLESS [All-Button] Rev1/Rev2

¥2,980

About version If you purchased by July-August 2021, it will be REV1.If you order the unit from September 2021, it will be Rev2.Please do not make a mistake. High resolution,...

Artwork Print & Cut / ZERO TWO FIGHTSTICK NOIR Layout

¥1,980¥2,980

High resolution, high definition print Artwork print is printed using the finest professional printer.Provides vivid and professional quality artwork replication.The printer is 1,440 dpi resolution, and a 9-color pigment ink...

Artwork Print & Cut / Qanba Obsidian Hitbox

¥1,980¥2,960

An Acrylic Top Panel is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be usedThis itemPlease purchase...

3mm Hole Adhesive PCB Feet (4set)

¥100

PCB feet with duplex tape for attaching a 3mm diameter PCB board.You can attach a 3mm hole PCB board, including BROOK FIGHTING BORD.

Artwork Print & Cut / ZERO TWO FIGHTSTICK & STICKLESS Bottom Panel

¥1,980¥2,980

High resolution, high definition print Artwork print is printed using the finest professional printer.Provides vivid and professional quality artwork replication.The printer is 1,440 dpi resolution, and a 9-color pigment ink...

ZERO ONE FIGHTSTICK Clear Case Kit

¥11,980¥14,980

An Fightstick case made of acrylic.The feature is that you can prepare the necessary parts and customize it to your liking.You can choose from a wide range of options, from...

Artwork Print & Cut / Razer Panthera

¥1,980¥2,960

An Acrylic Top Panel is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be usedThis itemPlease purchase...

Qanba Obsidian MatteBlack Acrylic Top Panel

¥3,400

It will be an acrylic top panel designed for Qanba obsidian.This item is a panel of Matte Black only on the surface.※ Please note that artwork can not be inserted....

Artwork Print & Cut / ZERO TWO Fightstick VEWLIX Extended Layout

¥1,980¥2,980

High resolution, high definition print Artwork print is printed using the finest professional printer.Provides vivid and professional quality artwork replication.The printer is 1,440 dpi resolution, and a 9-color pigment ink...

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Add A Coupon

Add A Coupon

Coupon code will work on checkout page