It will be an acrylic top panel designed for HITBOX.
This item is required to take advantage of the printed artwork.
To replace it, you need to remove the original acrylic panel.
Laser cutting for precision cutting
Use of acrylic used is 1.5mm Japanese acrylic.
Precise cutting is performed by commercial laser cutters.
|At first, HITBOX is upside down,
I will remove it with the six screw plus drivers enclosed by Red Maru.
|Next to the cable for the button
Remove the button.
It is okay if you do not remove the start button on the side.
The button and the cable are removed.
|Then remove the plastic rivets made of 10 places.
Press and remove the rivet pin from the bottom.