USB-C to USB-A Round Panel Mounter

¥1,180

Neutrik, which is commonly used in DIY fight stick kits, uses a USB-B printer cable to connect to the fight stick itself.This mounter eliminates this problem and allows you to...

Artwork Print & Cut / Hori Fighting Stick α

¥1,980¥2,960

High resolution, high definition print Artwork print is printed using the finest professional printer.Provides vivid and professional quality artwork replication.The printer is 1,440 dpi resolution, and a 9-color pigment ink...

USB 2.0 A to B Cable 25cm

¥280

This is a USB2.0 compatible A to B cable. It is used to connect the Brook Fighting Bord to a USB mounting jack or Neutrik. It is 25cm long, just...

GamerFinger 30mm Crystal/Crystal

¥880

Max Qty: Up to12units GF items in total

Dust Washer 36mm Clear

¥100

It is a dust washer that attaches to a lever made of acrylic.It is recommended for those who have illustrations attached to the top plate of Akecon!The size of the...

Artwork Print & Cut / Qanba Obsidian

¥1,980¥2,960

An Acrylic Top Panel is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be usedThis itemPlease purchase...

GamerFinger 30mm Purple/Crystal

¥880

Max Qty: Up to12units GF items in total

SANWA OBSF Translucent 30mm Pushbutton White

¥360¥350

The Translucent version of the OBSF-30 series for the standard arcade button.You can remove the button caps and insert the printed artwork.Perfect for ordering the art work prints and cuts!...

Brook UNIVERSAL FIGHTING BOARD

¥11,180

Max Qty : 2units

KDiT Clear Balltop Clear

¥660

Max Qty: Up to 1 units

SANWA JLF-TP-8YT-SK Joystick

¥2,480

It is a standard joystick made by SANWA. Board type joystick lever / flat iron plate / with shaft cover* Balltop is not included.Switching in 4-8 directions can be changed...

GamerFinger 30mm Blue/Black

¥880

Max Qty: Up to12units GF items in total

Brook Fighting Board Cable

¥1,680

It is a wiring for buttons and joysticks that can be used with Brook Fighting Board series products. Each wiring is summarized in a length that is easy to use,...

HORI Fighting Edge Acrylic Top Panel

¥2,500

HORI Fighting Edge for PlayStation4This is the acrylic top panel that is designed for use in the kitchen.PLEASE NOTE THAT IT IS NOT AVAILABLE ON THE XBOX VERSION. In order...

HORI RAP V Acrylic Top Panel

¥2,300

HORI RAP VIt will be an acrylic top designed for use.Please note that RAP4 KAI RAP V for Switch is not available. This item is required to take advantage of...

KDiT Silky Touch Lever Ball Grey

¥1,200

購入制限:1個まで

KDiT Bi-Color Balltop Violet / Blue

¥980

Max Qty: Up to 1 units

GamerFinger 30mm Sakura/Crystal

¥880

Max Qty: Up to12units GF items in total

GamerFinger 30mm Red/Crystal

¥880

Max Qty: Up to12units GF items in total

SANWA OBSC Translucent 24mm Pushbutton Clear

¥360¥350

The clear version of the OBSF-24 series for the standard arcade button.You can remove the button caps and insert the printed artwork.Perfect for ordering the art work prints and cuts!...

GamerFinger 30mm Purple/Black

¥880

Max Qty: Up to12units GF items in total

USB-C cable 2m

¥860

QC2.0 Fast Charging & Data Transfer: High-purity copper conductors enable fast charging up to 5V/2A when used with QC2.0 compatible fast chargers. High speed data transfer of up to 480Mbps...

GamerFinger 30mm Blue/Crystal

¥880

Max Qty: Up to12units GF items in total

GamerFinger 30mm Yellow/Crystle

¥880

Max Qty: Up to12units GF items in total

RAZER PANTHERA Acrylic Top Panel

¥2,300

It becomes an acrylic top designed for Razer Panthera. To use the printed artwork, we need this item.The original artwork must be peeled off. Precision cutting by laser cutting Acrylic...

HORI RAP N Acrylic Top Panel

¥2,300

This acrylic top panel is designed for HORI RAP N. To use the printed artwork, you will need this product. To replace it, you need to remove the original artwork....

Zero-Pi Fighting Board EASY

¥3,990

Max Qty : 2units

Artwork Print & Cut / Qanba Obsidian Pearl

¥1,980¥2,960

An Acrylic Top Panel is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be used This item...

GamerFinger 30mm Green/Crystal

¥880

Max Qty: Up to12units GF items in total

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Add A Coupon

Add A Coupon

Coupon code will work on checkout page