This joystick harness is compatible with the 20pin connector on Brook Fighting Board series boards.
It simplifies the assembly of a DIY Fightstick case.
It is an essential accessory when using a Brook Fighting Board or a GP2040-ce Fighting Board.
For wiring information, see the following page.
https://akecon.games/blogs/guide/brook-cable-guide
Features
It connects to joysticks equipped with a 5-pin connector, such as the Sanwa JLF series and Seimitsu LS series.
In addition to the joystick connector, it provides connections for 8 action buttons and 3 option buttons.
The connected option buttons are Start(Option)/Share(Back)/PS(Home).
Note: To use L3/R3/Touchpad, you will need to purchase the separately sold 4-Pin L3/R3/Touchpad Button Harness.
The wire colors are as follows.
Black: GND
White: Option / Start
Red/White: Share / Back
Gray: PS/ Home
Blue: 1P (□)
Red: 2P (△)
Gray: 3P (R1)
Purple: 4P (L1)
Black: GND
Orange: 1K (X)
Yellow: 2K (◯)
Green: 3K (R2)
Black: 4K (L2)
Black: GND
For wiring information, refer to the following page.
https://akecon.games/blogs/guide/brook-cable-guide