Clear Dust Washer 38mm

¥100

It is a dust washer that attaches to a lever made of acrylic.The size of the hole part is the size corresponding to the sanwa lever and Old Seimitsu Lever.

USB-C to USB-A Round Panel Mounter

¥1,180

Neutrik, which is commonly used in DIY fight stick kits, uses a USB-B printer cable to connect to the fight stick itself.This mounter eliminates this problem and allows you to...

SANWA OBSF Translucent 30mm Pushbutton White

¥390

The Translucent version of the OBSF-30 series for the standard arcade button.You can remove the button caps and insert the printed artwork.Perfect for ordering the art work prints and cuts!...

Brook UNIVERSAL FIGHTING BOARD

¥11,180

Max Qty : 3units

Artwork Print & Cut / Hori Fighting Stick α

¥2,080¥3,080

High resolution, high definition print Artwork print is printed using the finest professional printer.Provides vivid and professional quality artwork replication.The printer is 1,440 dpi resolution, and a 9-color pigment ink...

USB 2.0 A to B Cable 25cm

¥380

This is a USB2.0 compatible A to B cable. It is used to connect the Brook Fighting Bord to a USB mounting jack or Neutrik. It is 25cm long, just...

SANWA JLF-TP-8YT-SK Joystick

¥2,783

It is a standard joystick made by SANWA. Board type joystick lever / flat iron plate / with shaft cover* Balltop is not included.Switching in 4-8 directions can be changed...

HORI RAP V Acrylic Top Panel

¥2,300

HORI RAP VIt will be an acrylic top designed for use.Please note that RAP4 KAI RAP V for Switch is not available. This item is required to take advantage of...

SANWA OBSC Translucent 24mm Pushbutton Clear

¥390

The clear version of the OBSF-24 series for the standard arcade button.You can remove the button caps and insert the printed artwork.Perfect for ordering the art work prints and cuts!...

Artwork Print & Cut / Qanba Obsidian

¥2,080¥3,080

An Acrylic Top Panel is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be usedThis itemPlease purchase...

HORI Fighting Edge Acrylic Top Panel

¥2,700

HORI Fighting Edge for PlayStation4This is the acrylic top panel that is designed for use in the kitchen.PLEASE NOTE THAT IT IS NOT AVAILABLE ON THE XBOX VERSION. In order...

GamerFinger 30mm Crystal/Crystal

¥880

Max Qty: Up to12units GF items in total

HORI RAP N Acrylic Top Panel

¥2,300

This acrylic top panel is designed for HORI RAP N. To use the printed artwork, you will need this product. To replace it, you need to remove the original artwork....

20pin Joystick / Button Harness

¥1,400

Max Qty : 3units

GamerFinger 30mm Red/Crystal

¥880

Max Qty: Up to12units GF items in total

Artwork Print & Cut / Hori Rap N

¥2,080¥3,080

An Acrylic Top Panel is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be usedThis itemPlease purchase...

KDiT Bi-Color Balltop Violet / Blue

¥980

Max Qty: Up to 1 units

GamerFinger 30mm Purple/Crystal

¥880

Max Qty: Up to12units GF items in total

Artwork Print & Cut / Qanba Obsidian Hitbox

¥2,080¥3,080

An Acrylic Top Panel is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be usedThis itemPlease purchase...

Artwork Print & Cut / Hori Fighting Edge (PS4)

¥2,380¥3,380

An Acrylic Top Panel is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be used This item...

SANWA JLF-TPRG-8BYT-SK High Tension Silent Joystick Lever

¥5,708

This is a highly resilient quiet lever for the standard JLF series joystick manufactured by Sanwa. Adoption of a reed switch eliminates the tick-tock switch noise characteristic of micro switches.*The...

KDiT Clear Balltop Clear

¥660

Max Qty: Up to 2 units

USB2.0 A to B Right Angle 50cm

¥450

This is a USB 2.0 compatible A to B cable. It is used to connect the Brook Fighting Bord to a USB mounting jack or Neutrik. The L-shaped design allows...

GamerFinger 30mm Sakura/Crystal

¥880

Max Qty: Up to12units GF items in total

HitBox Acrylic Top Panel

¥2,500

It will be an acrylic top panel designed for HITBOX. This item is required to take advantage of the printed artwork.To replace it, you need to remove the original acrylic...

SANWA Custom parts set for JLF Joystick Lever

¥2,750

A set of parts that can be customized to your own feeling of the JLF series (* 1).■ Set contents· 4 types of spring· P. S pipe 4 types· Guide...

GamerFinger 30mm Blue/Crystal

¥880

Max Qty: Up to12units GF items in total

Artwork Print & Cut / Hori Rap V

¥2,080¥3,080

An Acrylic Top is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be used This item Please...

Artwork Print & Cut / Hitbox

¥2,100¥3,100

An Acrylic Top Panel is required to replace the artwork. This arcade controller is originally designed to be able to exchange artwork.Because only artwork can not be usedThis itemYou also...

Sunday,Monday,Tuesday,Wednesday,Thursday,Friday,Saturday
January,February,March,April,May,June,July,August,September,October,November,December
Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Add A Coupon

Add A Coupon

Coupon code will work on checkout page