※ Product image is REV1.
An arcade stick case produced by acrylic.
It is characterized by aligning the necessary parts and can be customized to your own preference.
You can select a rich option from the top plate layout to the height of the side panel.
Easy to create your own original arcade stick!
The size is 385 mm x 195 mm (w x d) high variable.
Tops and bottoms have a two-layer structure of 3 mm and 5 mm and can pinch printed artwork.
※ You need to assemble yourself by yourself. It is sold only for cases.
Buttons, PCBs and harnesses are not included.
Artwork and Stickless simultaneously buy artwork 20% OFF
If the artwork is ready, simultaneous purchase is advantageous.
After adding FightStick to your cart, add custom art orders for Zero Two Stickless to your cart,
You can purchase 20% off at the time of accounting.
If purchased with a bundle set, all necessary parts are 5% OFF
REV2 appeared with fine adjustment of layout
The layout was fine-tuned based on feedback.
For details, refer to the following images.
Slim Zero Two
Unlike Zero ONE, it is a slim and stylish impression Zero Two.
All option buttons can be pressed only with the lever and can be pushed with only the right hand.
Instead of the flowing joystick lever, all operations are only the Button layout that only works with buttons.
If you want to use the lever after a while, you can also use the lever type by purchasing the top panel。
Select the height of the side panel by the levers and the button that specifies.
Sanwa's JLF series, Gamerfinger button fits.
Seimitsu LS-32 series and LSX-NOBI-01 series can not be installed.
San-warttan, terminal when using Seimitsu buttonNeed to bend a littlethere is.
As it becomes a low center of gravity, stability will be high.
It conforms to the general Seimitsu lever. (LSX-NOBI-01 seriesIt is also acceptable)
Of course you can also use Sanwa JLF series.
Gamerfinger, Sanwa, Seimitsu, all buttons are available without any problems.
Korea lever, for Golden Lever.
Otherwise, in the direction of thinking, or thinking about special use.
Bit Bang Gaming Player LED Option
Player LEDsBy connecting to (sold separately) with the BROOK FIGHTING BORD series,
When connected to a console such as PS4, connection positions such as 1P and 2P can be displayed visually.
Top Panels provide 3 mm laser cut options optimized to use the Light pipe of Player LED.
All models can use this option, but all clear models do not necessarily require this option.
By selecting the option, Zero Two models are all open to the center of the top panel at the center of the top panel.
Do you want to use PS4 + Audio / Neutrik?
Usually, the Hall for USB Mounter on the side panel is 21 mm.
this is,USB-CTOA Mount JackThis is because it is designed on the premise of use.
However, if you use BROOK PS4 + Audio Fighting Bord or Neutrik, you need 24 mm + screw holes.
If you are thinking of these configurations, select "Yes" in the option of "USE PS4 + AAUDIO / NEUTRIK".
5 acrylic panels for the main unit
8 screws for the main unit (4 long and 4 shorts)
4 long nuts for the main body
PCB board screw and nut 2 set
2 spacers for PCB board
River mounting screws, nuts, and washers 4 pieces each
Four cases for cases