¥11,480 - Points

In StockIn StockOut of stock
Tax included.
Vendor: akeconSKU: Z2-CL-AB40-CLN/A


Layout: 40mm

  • 40mm
  • 45mm
  • 50mm

Side Panel Color: Clear

  • Clear
  • White
  • Black
  • Vermillion
  • ClearBlue
  • Matte black
  • Matte Black
Out of stock
Orders placed within will be shipped between and .
*Excluding Wednesday, Saturday, Sunday and holidays. hoursminutes

visamasteramerican expressjcbshopify payapple paygoogle paypaypalamazon payments

※ Product image is REV1.

An arcade stick case produced by acrylic.
It is characterized by aligning the necessary parts and can be customized to your own preference.
You can select a rich option from the top plate layout to the height of the side panel.
Easy to create your own original arcade stick!

The size is 385 mm x 195 mm (w x d) high variable.
Tops and bottoms have a two-layer structure of 3 mm and 5 mm and can pinch printed artwork.

※ You need to assemble yourself by yourself. It is sold only for cases.
Buttons, PCBs and harnesses are not included.

Artwork and Stickless simultaneously buy artwork 20% OFF

If the artwork is ready, simultaneous purchase is advantageous.
After adding FightStick to your cart, add custom art orders for Zero Two Stickless to your cart,
You can purchase 20% off at the time of accounting.

If purchased with a bundle set, all necessary parts are 5% OFF

Bundle setWhen purchased, you can combine parts necessary for assembly without getting lost, and can be purchased by 5% OFF.
For those who want assembled,[Assembled] bundle setThere is also.

REV2 appeared with fine adjustment of layout

The layout was fine-tuned based on feedback.
For details, refer to the following images.

Rev1 Rev2

Slim Zero Two

Unlike Zero ONE, it is a slim and stylish impression Zero Two.
All option buttons can be pressed only with the lever and can be pushed with only the right hand.

Stickless type

Instead of the flowing joystick lever, all operations are only the Button layout that only works with buttons.
If you want to use the lever after a while, you can also use the lever type by purchasing the top panel


Side panel width depth height
40mm 395mm 230mm 56mm
45mm - - 61mm
50mm - - 66mm

Select the height of the side panel by the levers and the button that specifies.
Sanwa's JLF series, Gamerfinger button fits.
Seimitsu LS-32 series and LSX-NOBI-01 series can not be installed.
San-warttan, terminal when using Seimitsu buttonNeed to bend a littlethere is.
As it becomes a low center of gravity, stability will be high.

It conforms to the general Seimitsu lever. (LSX-NOBI-01 seriesIt is also acceptable)
Of course you can also use Sanwa JLF series.
Gamerfinger, Sanwa, Seimitsu, all buttons are available without any problems.
Standard height.

Korea lever, for Golden Lever.
Otherwise, in the direction of thinking, or thinking about special use.

Bit Bang Gaming Player LED Option

Player LEDsBy connecting to (sold separately) with the BROOK FIGHTING BORD series,
When connected to a console such as PS4, connection positions such as 1P and 2P can be displayed visually.

Top Panels provide 3 mm laser cut options optimized to use the Light pipe of Player LED.
All models can use this option, but all clear models do not necessarily require this option.

By selecting the option, Zero Two models are all open to the center of the top panel at the center of the top panel.

Do you want to use PS4 + Audio / Neutrik?

Usually, the Hall for USB Mounter on the side panel is 21 mm.
this is,USB-CTOA Mount JackThis is because it is designed on the premise of use.
However, if you use BROOK PS4 + Audio Fighting Bord or Neutrik, you need 24 mm + screw holes.
If you are thinking of these configurations, select "Yes" in the option of "USE PS4 + AAUDIO / NEUTRIK".

set content

5 acrylic panels for the main unit
8 screws for the main unit (4 long and 4 shorts)
4 long nuts for the main body
PCB board screw and nut 2 set
2 spacers for PCB board
River mounting screws, nuts, and washers 4 pieces each
Four cases for cases

※ Harness and USB are not included. It will only be the case.


40mm, 45mm, 50mm

Side Panel Color

Clear, White, Black, Vermillion, ClearBlue, Matte black, Matte Black

Please refer to the following articles about how to assemble.
ZERO TWO Stickless [All-Button] Assembly Guide

We will explain the necessary parts when assembling.


You need BROOK PCB Bord.
Here Can be purchased.


20pin Joystick / Button Harness or BROOK FIGHTING BOARD CABLE
You need one point.
If you use the 20-pin joystick/button harness, you will also need one 4-pin L3/R3/touchpad button harness.

If you are using the All Button layout, you will also need an additional 5-pin All-Button conversion harness or Brook Hitbox Cable.

USB Mounter

You will need one NEUTRIK or USB C to A mounting jack.
This is needed to connect the PCB Bord to the main unit.

USB Cable

You will need either a USB 2.0 A to B cablev 25cm or USB 2.0 A to B right angle cable 50cm to connect the PCB Bord to a USB mounting jack or NEUTRIK, etc.

A to B cable is fine as long as it is longer than 25cm.

If you are using the USB C to A mounting jack
You will need one USB A to USB C cable with USB 2.0 or higher to connect the unit to your game console, PC, etc.

If you have it for charging your smartphone or other devices, you can use it.

Joysticklever, buttons, etc. are required.

About  Buttons

Action Button
Both Snap-in and screw type are available.

Option Button
The thickness of the acrylic panel to be installed is 5 mm, so the screw type is recommended.
It is also possible to use the snap-in type, but depending on the brand used, it may be easier to remove.

About acrylic panel

Because of the nature of acrylic, drug resistance such as alcohol is low
Do not use alcohol solvents, etc. when cleaning.
Also, please be careful that it may be damaged by the nature of acrylic when it is dropped or excessive shock impact.

Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Add A Coupon

Add A Coupon

Coupon code will work on checkout page