ZERO TWO FIGHTSTICK Matte Black Case Kit

This arcade stick case is made of acrylic.
It features the ability to customize it to your own taste with the necessary parts.
A wide variety of options are available, from the layout of the top panel to the height of the side panels.
You can easily create your very own original arcade stick!

Size is 385mm x 195mm (W x D) Height is variable with options.
The top and bottom are made of two layers of 3mm and 5mm to sandwich printed artwork.

Customers need to assemble the case by themselves. Case only sold.
Levers, buttons, PCBs, and harnesses are not included.

If you purchase a bundle set, you get 5% off all the parts you need!

Bundle Sets you can freely combine the necessary parts for assembly without hesitation by using the selection method, and you can also purchase it at an additional 5% discount.
For those who want pre-assembled [Assembled] Bundle Set are also available.

Matte-textured black panel configuration

All panels are constructed with matte black panels on one side.
Unlike the ZERO ONE, the ZERO TWO is slim and stylish.
All optional buttons can be pressed only with the right hand without taking your hand off the lever.

Layout Options

Four layout options are available.
Also, individual top panels are sold separately, so you can change the layout by simply replacing the top panel without having to repurchase the case.

Standard	NOIR
Standard Extended	Korean NOIR

Standard Extended

With the standard Layout, the levers and buttons are too close to each other for people with large hands, causing various inconveniences.
To solve these problems, the distance between the button and lever hole has been made farther than in the regular Layout.
The button placement and distance between buttons are the same as for the standard Layout.

KOREAN NOIR

CROWN and IST Korean levers require a 35mm lever hole.
This NOIR layout is designed to accommodate them.
Please select this option if you use non-Japanese levers.

Size

The height of the side panel should be selected according to the lever and button to be specified.
40mm:
Sanwa's JLF series and GamerFinger buttons are compatible.
Seimitsu LS-32 series and LSX-NOBI-01 series cannot be installed.
When using Sanwa or Seimitsu buttons, the terminals must be slightly

45mm:
Compatible with all Seimitsu levers. (LSX-NOBI-01 series is also acceptable)
Sanwa JLF series are also available, of course.
GamerFinger, Sanwa, Seimitsu, all buttons can be used without any problem.
Standard height.

50mm:
For Korean Lever and Golden Lever.
Other: For those who need more height or are considering special applications.

Bit Bang Gaming Player LED OPTION

Player LEDs(sold separately) and Brook Fighting Bord series
When connected to a console such as PS4, the LEDs can visually indicate the connection position of 1P, 2P, etc.

The top panel offers a 3mm laser-cut option optimized for use with Player LED light pipes.
All models can take advantage of this option, but all-clear models do not necessarily require this option.

By selecting the option, all ZERO TWO models offer four holes in the left center of the top panel.

Will you be using PS4+Audio/NEUTRIK?

Normally, the hole for USB mounter on the side panel is 21mm.
This is not the case for the USB-C to A-mount jack This is because it is designed for use with
However, when using the Brook PS4+Audio Fighting Bord or NEUTRIK, a 24mm + threaded hole is required.
If you are considering these configurations, please select "YES" for the optional "USE PS4+ Aaudio/NEUTRIK" question.

Set Contents

acrylic panels for the main unit x5
screws for main body x8
long nuts for main body x4
screws and nuts for PCB board x2set
Spacers for PCB board x2
Case feet x4

Assembly Guide

ZERO ONE FIGHTSTICK
https://akecon.games/blogs/guide/zero-one-build

ZERO ONE STICKLESS
https://akecon.games/blogs/guide/zero-one-stickless-build

ZERO TWO FIGHTSTICK
https://akecon.games/blogs/guide/zerotwo-installguide

ZERO TWO STICKLESS
https://akecon.games/blogs/guide/zero-two-build

Parts Guide

Description of parts required for assembly.

PCB Bord

The PCB Bord manufactured by Brook is required.
Click hereYou can purchase it from here.

Harnesses

20pin joystick/button harness or Brook Fighting Board Cable
Either one is required.
If you are using the 20-pin joystick/button harness4-Pin L3/R3/Touchpad Button Harnessis also required.

For the All Button layout, you will needConversion harness for 5-pin All-Button or One additional Brook Hitbox Cable is also required.

USB Mounter

USB C to A Mount Jack or one mounter such as NEUTRIK is required.
This is needed to connect the PCB Bord to the main unit.

USB cable

To connect PCB Bord to USB Mount Jack or NEUTRIK, you will need either a USB2.0 A to B cable 25cm
or USB 2.0 A to B right angle cable 50cm One of the following is required
If the A to B cable is 25cm or longer, it is fine.

If you are using the USB C to A Mount Jack
You will need one USB A to USB C cable of USB 2.0 or higher to connect the main unit to a game console, PC, etc.
If you have one for charging smartphones or other devices, you can use it.

Action Buttons：
Both snap-in and screw type are available.

Optional Buttons：
Since the thickness of the acrylic panel to be installed is 5mm, the screw type is recommended.
It is also possible to install the screw type, but it may be easier to pull out depending on the brand used.

In addition, a lever is required for Fightstick.

About acrylic panels

Due to the nature of acrylic, it has low resistance to alcohol and other chemicals.
Do not use alcohol solvents when cleaning the product.
Also, be aware that the acrylic may be damaged if dropped or subjected to excessive impact.