ZERO ONE STICKLESS [All-Button] Matte Black Case Kit

¥17,800 - Points

In StockIn StockOut of stock
Tax included.
Vendor: akeconSKU: Z1-AMB-AB40-MBN/A


Side Panel Size: 40mm

  • 40mm
  • 45mm
  • 50mm

Side Panel Color: matte black

  • matte black
  • clear
  • white
  • black
  • vermillion
  • ClearBlue
Out of stock
Orders placed within will be shipped between and .
*Excluding Wednesday, Saturday, Sunday and holidays. hoursminutes

visamasteramerican expressjcbshopify payapple paygoogle paypaypalamazon payments

An Fightstick case made of acrylic.
The feature is that you can prepare the necessary parts and customize it to your liking.
You can choose from a wide range of options, from the layout of the top plate to the height of the side panels.
You can easily create your own original Fightstick!

Size is 395mm x 230mm (W x L) Height is variable depending on options.
The top and bottom are made of two layers of 3mm and 5mm, allowing you to insert printed artwork.

*You will need to assemble it by yourself. Only the case is sold.

Buy artwork and FIGHTSTICK at the same time and get 20% discount on artwork.

If your artwork is ready, it's a great deal to buy at the same time.
After adding FIGHTSTICK to your cart, you can add your ZERO ONE FIGHTSTICK custom art order to your cart.
You can purchase with a 20% discount at the time of payment.

If you buy a Bundle set, you get 5% discount on all the parts you need.

If you purchase it as a Bundle set, you can freely combine the parts required for assembly without hesitation,
and you can purchase it at 5% off.
For those who want pre-assembled, there is also a [FULLY ASSEMBLED] Bundle set.

All Matte Black composition

The ZERO ONE is composed entirely of matte black.
The 3mm panel is matte black on one side, and the 5mm panel is matte black on both sides.


It is an All Button layout that performs all operations with only buttons.
If you want to use the lever later, you can use the lever type by purchasing the top panel.

Side panel size

Side panel Width Length Height
40mm 395mm 230mm 56mm
45mm - - 61mm
50mm - - 66mm

The height of the side panel should be selected according to the lever and button to be used.
Sanwa JLF series and GamerFinger buttons will fit.
LS-32 series from SEIMITSU and LSX-NOBI-01 series cannot be installed.
When using Sanwa buttons or Seimitsu buttons, it is necessary to bend the terminal slightly.
A lower center of gravity provides greater stability.

Compatible with all SEIMITSU levers.
All GamerFinger, Sanwa and Seimitsu buttons can be used without any problem.
Standard height.

For Korean lever and Golden Lever.
For other users who need more height or have special needs.

Do you want to use PS4+Audio/NEUTRIK?

Normally, the hole for USB mounter on the side panel is 21mm.
This is because it is designed to use USB-C to A mount jack.
However, if you want to use Brook PS4+Audio Fighting Bord or NEUTRIK, you need 24mm + screw hole.
If you are considering these configurations, please select "YES" for the "USE PS4+ Aaudio/NEUTRIK" option question.


5 acrylic panels for the main body
8 screws for the main body
4 long nuts for the main body
2 sets of screws and nuts for the PCB board
2 spacers for the PCB board
4 plastic feet for the case

* Harness and USB are not included. Only the case.

Side Panel Size

40mm, 45mm, 50mm

Side Panel Color

matte black, clear, white, black, vermillion, ClearBlue

Please refer to the following articles about how to assemble.
ZERO ONE Stickkess [All-Button] Assembly Method

We will explain the necessary parts when assembling.


You need BROOK PCB Bord.
Here Can be purchased.


20pin Joystick / Button Harness or BROOK FIGHTING BOARD CABLE
You need one point.
If you use the 20-pin joystick/button harness, you will also need one 4-pin L3/R3/touchpad button harness.

If you are using the All Button layout, you will also need an additional 5-pin All-Button conversion harness or Brook Hitbox Cable.

USB Mounter

You will need one NEUTRIK or USB C to A mounting jack.
This is needed to connect the PCB Bord to the main unit.

USB Cable

You will need a USB 2.0 A to B Right Angle Cable 50cm to connect the PCB Bord to a USB mounting jack or NEUTRIK, etc.

*ZERO ONE STICKLESS will interfere with the buttons and PCB Bord if you use a straight type USB cable.

If you are using the USB C to A mounting jack
You will need one USB A to USB C cable with USB 2.0 or higher to connect the unit to your game console, PC, etc.

If you have it for charging your smartphone or other devices, you can use it.

Joysticklever, buttons, etc. are required.

About  Buttons

Action Button
Both Snap-in and screw type are available.

Option Button
The thickness of the acrylic panel to be installed is 5 mm, so the screw type is recommended.
It is also possible to use the snap-in type, but depending on the brand used, it may be easier to remove.

About acrylic panel

Because of the nature of acrylic, drug resistance such as alcohol is low
Do not use alcohol solvents, etc. when cleaning.
Also, please be careful that it may be damaged by the nature of acrylic when it is dropped or excessive shock impact.

Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Add A Coupon

Add A Coupon

Coupon code will work on checkout page