By using this PCB, if multiple controllers such as offline matches and tournaments are connected
There is an advantage that you will be able to understand which position is connected.
Ideal for DIY controller
Many commercially available arcade sticks provide player indicators as standard.
However, the DIY arcade stick is lost because it is not easy to access LEDs integrated with the control PCB that is commonly used.
This product easily resolves its problem and easily provides a player indicator with a DIY arcade stick, such as Zero One, Zero Two Fightstick, and connecting to Brook fighting Bord.
BROOK PCB Compatibility
You can connect to the following Brook PCB Bord's J2 port.
Note that the position of the J2 port is different depending on the board.
- Brook Universal Fighting Bord (with Header)
- BROOK PS3 / PS4 Plus Fighting Board Plus
- BROOK PS4 + Audio Fighting Board
- BROOK ZERO-PI Fighting Board Easy
- BROOK XBOX FIGTING BORD
- BROOK WIRELESS FIGHTINGBOARD
Player LEDs PCB x1
Strip of optically clear double-sided tape x1
Drill guide/template x1
Player LEDs PCB cable x1
Sets of light pipes for two different installation heights x2
We use light pipe part numbers VLP-250-F and VLP-400-F.
There are many more available from the manufacturer Bivar Inc. in case you need to source separately for your project.
If connected to a console such as PS4, it lights up to the current state from 1P, 2P, 3P, 4P, but
For PC connections, the way of lighting is different depending on the FightingBord you are using.
For UFB, all LEDs will light.