An arcade stick case made of Japanese acrylic.
The feature is that you can prepare the necessary parts and customize it to your liking.
You can choose from a wide range of options, from the layout of the top plate to the height of the side panels.
You can easily create your own original Fightstick!
Size is 385mm x 195mm (W x L) Height is variable depending on options.
The top and bottom are made of two layers of 3mm and 5mm, allowing you to insert printed artwork.
*You will need to assemble it by yourself. Only the case is sold.
If you buy a Bundle set, you get 10% discount on all the parts you need.
If you purchase it as a Bundle set, you can freely combine the parts required for assembly without hesitation,
and you can purchase it at 10% off.
For those who want pre-assembled, there is also a [FULLY ASSEMBLED] Bundle set.
Matte and glossy white panel composition
The top and bottom are in matte textured white panels.
The rest of the panel is made up of glossy white panels.
Unlike the ZERO ONE, the ZERO TWO is slim and stylish.
All optional buttons can be pressed with the right hand only without taking your hand off the lever.
You can choose from three different layouts.
The top panel is also sold separately, so you can change the layout by simply replacing the top panel without having to buy a new case.
|VEWLIX EXTENDED||KOREAN NOIR|
In the normal VEWLIX, the lever and the position of the button were too close for the person with a large hand, and various inconveniences occurred.
In order to solve these problems, this is the version that made the distance between the button and the lever hole farther than the normal VEWLIX.
Buttons and distance between buttons are the same as normal.
The CROWN and IST Korean levers require a 35mm lever hole.
This NOIR layout is compatible with them.
Please select this option if you are using other than Japanese levers.
Select the height of the side panel by the levers and the button that specifies.
Sanwa JLF series, Gamerfinger button fits.
Seimitsu LS-32 series and LSX-NOBI-01 series can not be installed.
San-warttan, terminal when using Seimitsu buttonNeed to bend a littlethere is.
As it becomes a low center of gravity, stability will be high.
It conforms to the general Seimitsu lever. (LSX-NOBI-01 seriesIt is also acceptable)
Of course you can also use Sanwa JLF series.
Gamerfinger, Sanwa, Seimitsu, all buttons are available without any problems.
Korea lever, for Golden Lever.
Otherwise, in the direction of thinking, or thinking about special use.
Do you want to use PS4+Audio/NEUTRIK?
Normally, the hole for USB mounter on the side panel is 21mm.
This is because it is designed to use USB-C to A mount jack.
However, if you want to use Brook PS4+Audio Fighting Bord or NEUTRIK, you need 24mm + screw hole.
If you are considering these configurations, please select "YES" for the "USE PS4+ Aaudio/NEUTRIK" option question.
5 acrylic panels for the main body
8 screws for the main body
4 long nuts for the main body
2 sets of screws and nuts for the PCB board
2 spacers for the PCB board
4 plastic feet for the case
* Harness and USB are not included. Only the case.