NewSold out


¥16,280 - Points

In StockIn StockOut of stock
Tax included.
Vendor: akeconSKU: Z2-MW-VLX40-WHN/A

Layout: VEWLIX

  • NOIR
  • VEWLIX Extended
  • Korean NOIR

Side Panel Size: 40mm

  • 40mm
  • 45mm
  • 50mm

Side Panel Color: white

  • white
  • clear
  • black
  • vermillion
  • ClearBlue
  • matte black

visamasteramerican expressjcbshopify payapple paygoogle paypaypalamazon payments

An arcade stick case made of Japanese acrylic.
The feature is that you can prepare the necessary parts and customize it to your liking.
You can choose from a wide range of options, from the layout of the top plate to the height of the side panels.
You can easily create your own original Fightstick!

Size is 385mm x 195mm (W x L) Height is variable depending on options.
The top and bottom are made of two layers of 3mm and 5mm, allowing you to insert printed artwork.

*You will need to assemble it by yourself. Only the case is sold.

Buy artwork and FIGHTSTICK at the same time and get 20% discount on artwork.

If your artwork is ready, it's a great deal to buy at the same time.
After adding FIGHTSTICK to your cart, you can add your ZERO TWO FIGHTSTICK custom art order to your cart.
You can purchase with a 20% discount at the time of payment.

If you buy a Bundle set, you get 10% discount on all the parts you need.

If you purchase it as a Bundle set, you can freely combine the parts required for assembly without hesitation,
and you can purchase it at 10% off.
For those who want pre-assembled, there is also a [FULLY ASSEMBLED] Bundle set.

Slim Zero Two

Unlike Zero ONE, it is a slim and stylish impression Zero Two.
All option buttons can be pressed only with the lever and can be pushed with only the right hand.

Layout Options

You can choose from three different layouts.
The top panel is also sold separately, so you can change the layout by simply replacing the top panel without having to buy a new case.


VEWLIX Extended

In the normal VEWLIX, the lever and the position of the button were too close for the person with a large hand, and various inconveniences occurred.
In order to solve these problems, this is the version that made the distance between the button and the lever hole farther than the normal VEWLIX.
Buttons and distance between buttons are the same as normal.


The CROWN and IST Korean levers require a 35mm lever hole.
This NOIR layout is compatible with them.
Please select this option if you are using other than Japanese levers.


Side panel width depth height
40mm 395mm 230mm 56mm
45mm - - 61mm
50mm - - 66mm

Select the height of the side panel by the levers and the button that specifies.

Sanwa JLF series, Gamerfinger button fits.
Seimitsu LS-32 series and LSX-NOBI-01 series can not be installed.
San-warttan, terminal when using Seimitsu buttonNeed to bend a littlethere is.
As it becomes a low center of gravity, stability will be high.

It conforms to the general Seimitsu lever. (LSX-NOBI-01 seriesIt is also acceptable)
Of course you can also use Sanwa JLF series.
Gamerfinger, Sanwa, Seimitsu, all buttons are available without any problems.
Standard height.

Korea lever, for Golden Lever.
Otherwise, in the direction of thinking, or thinking about special use.

Do you want to use PS4+Audio/NEUTRIK?

Normally, the hole for USB mounter on the side panel is 21mm.
This is because it is designed to use USB-C to A mount jack.
However, if you want to use Brook PS4+Audio Fighting Bord or NEUTRIK, you need 24mm + screw hole.
If you are considering these configurations, please select "YES" for the "USE PS4+ Aaudio/NEUTRIK" option question.


5 acrylic panels for the main body
8 screws for the main body
4 long nuts for the main body
2 sets of screws and nuts for the PCB board
2 spacers for the PCB board
4 plastic feet for the case

* Harness and USB are not included. Only the case.



Side Panel Size

40mm, 45mm, 50mm

Side Panel Color

white, clear, black, vermillion, ClearBlue, matte black

Please refer to the following for how to assemble.
Zero Two Fightsitck Assembly Guide

We will explain the necessary parts when assembling.


You need BROOK PCB Bord.
Here Can be purchased.


20pin Joystick / Button Harness or BROOK FIGHTING BOARD CABLE
You need one point.
If you use the 20-pin joystick/button harness, you will also need one 4-pin L3/R3/touchpad button harness.

If you are using the All Button layout, you will also need an additional 5-pin All-Button conversion harness or Brook Hitbox Cable.

USB Mounter

You will need one NEUTRIK or USB C to A mounting jack.
This is needed to connect the PCB Bord to the main unit.

USB Cable

You will need either a USB 2.0 A to B cablev 25cm or USB 2.0 A to B right angle cable 50cm to connect the PCB Bord to a USB mounting jack or NEUTRIK, etc.

A to B cable is fine as long as it is longer than 25cm.

If you are using the USB C to A mounting jack
You will need one USB A to USB C cable with USB 2.0 or higher to connect the unit to your game console, PC, etc.

If you have it for charging your smartphone or other devices, you can use it.

Joysticklever, buttons, etc. are required.

About  Buttons

Action Button
Both Snap-in and screw type are available.

Option Button
The thickness of the acrylic panel to be installed is 5 mm, so the screw type is recommended.
It is also possible to use the snap-in type, but depending on the brand used, it may be easier to remove.

About acrylic panel

Because of the nature of acrylic, drug resistance such as alcohol is low
Do not use alcohol solvents, etc. when cleaning.
Also, please be careful that it may be damaged by the nature of acrylic when it is dropped or excessive shock impact.

Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Add A Coupon

Add A Coupon

Coupon code will work on checkout page