An Fightstick case produced by acrylic.
It is characterized by aligning the necessary parts and can be customized to your own preference.
You can select a rich option from the top plate layout to the height of the side panel.
Easy to create your own original Fightstick!
The size is 395 mm x 230 mm (w x d) height variable by option.
Tops and bottoms have a two-layer structure of 3 mm and 5 mm and can pinch printed artwork.
*You will need to assemble it by yourself. Only the case is sold.
Buy artwork and FIGHTSTICK at the same time and get 20% discount on artwork.
If your artwork is ready, it's a great deal to buy at the same time.
After adding FIGHTSTICK to your cart, you can add your ZERO ONE FIGHTSTICK custom art order to your cart.
You can purchase with a 20% discount at the time of payment.
If you buy a Bundle set, you get 5% discount on all the parts you need.
If you purchase it as a Bundle set, you can freely combine the parts required for assembly without hesitation,
and you can purchase it at 5% off.
For those who want pre-assembled, there is also a [FULLY ASSEMBLED] Bundle set.
Gloss White acrylic panel Configuration
A clear panel is included to pinch and protect the artwork on top and bottom.
White panels consist of 5mm acrylic and clear top and bottom protection panels are 3mm panels.
Layout option
You can choose four layouts.
In addition, since only the top plate is sold separately, it is possible to change the layout only by replacing the top plate without buying the case.
 |
 |
| VEWLIX | Noir |
 |
 |
| VEWLIX EXTENDED | KOREAN NOIR |
VEWLIX EXTENDED
If it is a normal VEWLIX, the lever and the button position were too close to the lever and the button position, so various disadvantages occurred.
In order to solve those issues, the normal VEWLIX is a longer version of the button and the lever hall distance.
The placement of the button and the distance between the buttons are equivalent.
KOREAN NOIR
Crown and IST Korean levers require a 35 mm lever hole.
It is a NOIR layout that corresponds to them.
If you are using anything other than the Japanese lever, please select this.
Side Panel Size
| Side panel | width | depth | height |
| 40mm | 395mm | 230mm | 56mm |
| 45mm | - | - | 61mm |
| 50mm | - | - | 66mm |
Select the height of the side panel by the levers and the button that specifies.
40mm:
Sanwa JLF series, Gamerfinger button fits.
Seimitsu LS-32 series,LSX-NOBI-01 seriesCan not be installed.
San-warttan, terminal when using Seimitsu buttonNeed to bend a littlethere is.
As it becomes a low center of gravity, stability will be high.
45mm:
It conforms to the general Seimitsu lever. (LSX-NOBI-01 seriesIt is also acceptable)
Of course you can also use Sanwa JLF series.
Gamerfinger, Sanwa, Seimitsu, all buttons are available without any problems.
Standard height.
50mm:
Korea lever, for Golden Lever.
Otherwise, in the direction of thinking, or thinking about special use.
Bit Bang Gaming Player LED Option
Player LEDs By connecting to (sold separately) with the BROOK FIGHTING BORD series,
When connected to a console such as PS4, connection positions such as 1P and 2P can be displayed visually.
Top Panels provide 3 mm laser cut options optimized to use the Light pipe of Player LED.
All models can use this option, but all clear models do not necessarily require this option.
By selecting the option, four holes are opened at the center of the panel at the center of the panel in all models.
Do you want to use PS4 + Audio / Neutrik?
Normally, the hole for USB mounter on the side panel is 21mm.
This is because it is designed to use USB-C to A mount jack.
However, if you want to use Brook PS4+Audio Fighting Bord or NEUTRIK, you need 24mm + screw hole.
If you are considering these configurations, please select "YES" for the "USE PS4+ Aaudio/NEUTRIK" option question.
Accessories
5 acrylic panels for the main body
8 screws for the main body
4 long nuts for the main body
2 sets of screws and nuts for the PCB board
2 spacers for the PCB board
4 plastic feet for the case