Options

Describes the option of ordering artwork.

Insert cut

This is a choice of whether or not the red section is cut.
If you don't want to choose no, in that case insert cut is not included in the item.
This option is to reduce the burden of work staff.

If you choose yes, select the maker of buttons to use next.
Optimized for the selected manufacturer.

In addition, if you want to design insert cuts, please make a reference below.
https://akecon.games/a/help/article/10534

Upload your file

Upload your artwork files using templates.
The maximum file upload limit is 250 MB.
The corresponding file format is PSD (recommended), PNG, tiff, PDF, jpg.

Can I open a screw hole?

This option exists only for some artwork prints.
The default is to leave the initial state (manufacturer standard).
If you want to change, select Yes.

About paper

Matte paper is selected in the standard.
The specification of the paper is as follows.

Matte paper
Base: dedicated paper thickness μ M surface: no gloss Whiteness: 93%
A thick white paper with a high thickness

Cicada gross
Base: printing paper thickness μ M surface: semi gloss whiteness
High whiteness printing paper base with thickness

Notes for selecting semi gloss paper

It may be slightly scorched by the characteristic of the cut with a laser cutter.
It is about the slightly scorched part by the reflection of light.
I would like to order your order after understanding the product characteristics. Please note that no refund or return is made.