ZERO ONE STICKLESS [All-Button] Rev2 Matte White/White Case Kit

€108,66 - Points

In StockIn StockOut of stock
Tax included.
Vendor: akeconSKU: Z1-WH-AB40-WHN/A


Side Panel Size: 40mm

  • 40mm
  • 45mm
  • 50mm

Side Panel Color: white

  • white
  • clear
  • black
  • vermillion
  • ClearBlue
  • matte black
Out of stock
Orders placed within will be shipped between and .
*Excluding Wednesday, Saturday, Sunday and holidays. hoursminutes

visamasteramerican expressjcbshopify payapple paygoogle paypaypalamazon payments

An arcade stick case produced by acrylic.
It is characterized by aligning the necessary parts and can be customized to your own preference.
You can select a rich option from the top plate layout to the height of the side panel.
Easy to create your own original arcade stick!

The size is 395 mm x 230 mm (w x d) height variable by option.
Tops and bottoms have a two-layer structure of 3 mm and 5 mm and can pinch printed artwork.

※ You need to assemble yourself by yourself. It is sold only for cases.
Buttons, PCBs and harnesses are not included.

If purchased with a bundle set, all necessary parts are 5% OFF

Bundle setWhen purchased, you can combine parts necessary for assembly without getting lost, and can be purchased by 5% OFF.
For those who want assembled,[Assembled] bundle setThere is also.

REV2 appeared with fine adjustment of layout

The layout was fine-tuned based on feedback.
For details, refer to the following images.

Rev1 Rev2

Glossy white panel and matte white panel

A clear panel is included to pinch and protect the artwork on top and bottom.
White panels consist of 5mm acrylic and clear top and bottom protection panels are 3mm panels.

Stickless type

 Top and bottom are composed of matte white panels and The rest of the panels are made of 5mm glossy white panels.

Side panel size

Side panel width depth height
40mm 395mm 230mm 56mm
45mm - - 61mm
50mm - - 66mm

Select the height of the side panel by the levers and the button that specifies.
Sanwa's JLF series, Gamerfinger button fits.
Seimitsu LS-32 series,LSX-NOBI-01 seriesCan not be installed.
San-warttan, terminal when using Seimitsu buttonNeed to bend a littlethere is.
As it becomes a low center of gravity, stability will be high.

It conforms to the general Seimitsu lever. (LSX-NOBI-01 seriesIt is also acceptable)
Of course you can also use Sanwa JLF series.
Gamerfinger, Sanwa, Seimitsu, all buttons are available without any problems.
Standard height.

Korea lever, for Golden Lever.
Otherwise, in the direction of thinking, or thinking about special use.

Bit Bang Gaming Player LED Option

Player LEDs By connecting to (sold separately) with the BROOK FIGHTING BORD series,
When connected to a console such as PS4, connection positions such as 1P and 2P can be displayed visually.

Top Panels provide 3 mm laser cut options optimized to use the Light pipe of Player LED.
All models can use this option, but all clear models do not necessarily require this option.

By selecting the option, four holes are opened at the center of the panel at the center of the panel in all models.

Do you want to use PS4 + Audio / Neutrik?

Usually, the Hall for USB Mounter on the side panel is 21 mm.
this is USB-C to A Mount Jack This is because it is designed on the premise of use.
However, if you use BROOK PS4 + Audio Fighting Bord or Neutrik, you need 24 mm + screw holes.
If you are thinking of these configurations, select "Yes" in the option of "USE PS4 + AAUDIO / NEUTRIK".


5 acrylic panels for the main unit
8 screws for the main unit
4 long nuts for the main body
PCB board screw and nut 2 set
2 spacers for PCB board
Four cases for cases

Side Panel Size

40mm, 45mm, 50mm

Side Panel Color

white, clear, black, vermillion, ClearBlue, matte black

Please refer to the following articles about how to assemble.
ZERO ONE Stickkess [All-Button] Assembly Method

We will explain the necessary parts when assembling.


You need BROOK PCB Bord.
Here Can be purchased.


20pin Joystick / Button Harness or BROOK FIGHTING BOARD CABLE
You need one point.
If you use the 20-pin joystick/button harness, you will also need one 4-pin L3/R3/touchpad button harness.

If you are using the All Button layout, you will also need an additional 5-pin All-Button conversion harness or Brook Hitbox Cable.

USB Mounter

You will need one NEUTRIK or USB C to A mounting jack.
This is needed to connect the PCB Bord to the main unit.

USB Cable

You will need a USB 2.0 A to B Right Angle Cable 50cm to connect the PCB Bord to a USB mounting jack or NEUTRIK, etc.

*ZERO ONE STICKLESS will interfere with the buttons and PCB Bord if you use a straight type USB cable.

If you are using the USB C to A mounting jack
You will need one USB A to USB C cable with USB 2.0 or higher to connect the unit to your game console, PC, etc.

If you have it for charging your smartphone or other devices, you can use it.

Joysticklever, buttons, etc. are required.

About  Buttons

Action Button
Both Snap-in and screw type are available.

Option Button
The thickness of the acrylic panel to be installed is 5 mm, so the screw type is recommended.
It is also possible to use the snap-in type, but depending on the brand used, it may be easier to remove.

About acrylic panel

Because of the nature of acrylic, drug resistance such as alcohol is low
Do not use alcohol solvents, etc. when cleaning.
Also, please be careful that it may be damaged by the nature of acrylic when it is dropped or excessive shock impact.

Not enough items available. Only [max] left.
Add to WishlistBrowse WishlistRemove Wishlist
Shopping cart

Your cart is empty.

Return To Shop

Add Order Note Edit Order Note
Add A Coupon

Add A Coupon

Coupon code will work on checkout page