An Fightstick case made of acrylic.
The feature is that you can prepare the necessary parts and customize it to your liking.
You can choose from a wide range of options, from the layout of the top plate to the height of the side panels.
You can easily create your own original Fightstick!
Size is 395mm x 230mm (W x D) Height is variable with options.
The top and bottom are made of two layers of 3mm and 5mm.
*You will need to assemble it by yourself. Only the case is sold.
If you buy a Bundle set, you get 5% discount on all the parts you need.
If you purchase it as a Bundle set, you can freely combine the parts required for assembly without hesitation,
and you can purchase it at 5% off.
For those who want pre-assembled, there is also a [FULLY ASSEMBLED] Bundle set.
All-matte black configuration
The ZERO ONE is composed entirely of matte black.
The 3mm panel is matte black on one side, and the 5mm panel is matte black on both sides.
Layout option
You can choose from four layouts.
In addition, since only the top plate is sold individually, the layout can be changed simply by replacing the top plate without having to repurchase the case.
![]() |
![]() |
VEWLIX | Noir |
![]() |
![]() |
VEWLIX EXTENDED | KOREAN NOIR |
VEWLIX Extended
In the normal VEWLIX, the lever and the position of the button were too close for the person with a large hand, and various inconveniences occurred.
In order to solve these problems, this is the version that made the distance between the button and the lever hole farther than the normal VEWLIX.
Buttons and distance between buttons are the same as normal.
KOREAN NOIR
The CROWN and IST Korean levers require a 35mm lever hole.
This NOIR layout is compatible with them.
Please select this option if you are using other than Japanese levers.
Side panel size
Side panel | width | depth | height |
40mm | 395mm | 230mm | 56mm |
45mm | - | - | 61mm |
50mm | - | - | 66mm |
The height of the side panel should be selected according to the lever and button to be used.
40mm:
Sanwa's JLF series and GamerFinger buttons will fit.
LS-32 series from SEIMITSU and LSX-NOBI-01 series cannot be installed.
When using Sanwa buttons or Seimitsu buttons, it is necessary to bend the terminal slightly.
A lower center of gravity provides greater stability.
45mm:
Compatible with all SEIMITSU levers.
All GamerFinger, Sanwa and Seimitsu buttons can be used without any problem.
Standard height.
50mm:
For Korean lever and Golden Lever.
For other users who need more height or have special needs.
Bit Bang Gaming Player LED Option
Player LEDs By connecting to (sold separately) with the BROOK FIGHTING BORD series,
When connected to a console such as PS4, connection positions such as 1P and 2P can be displayed visually.
Top Panels provide 3 mm laser cut options optimized to use the Light pipe of Player LED.
All models can use this option, but all clear models do not necessarily require this option.
By selecting the option, four holes are opened at the center of the panel at the center of the panel in all models.
Do you want to use PS4+Audio/NEUTRIK?
Normally, the hole for USB mounter on the side panel is 21mm.
This is because it is designed to use USB-C to A mount jack.
However, if you want to use Brook PS4+Audio Fighting Bord or NEUTRIK, you need 24mm + screw hole.
If you are considering these configurations, please select "YES" for the "USE PS4+ Aaudio/NEUTRIK" option question.
Accessories
5 acrylic panels for the main body
8 screws for the main body
4 long nuts for the main body
2 sets of screws and nuts for the PCB board
2 spacers for the PCB board
4 plastic feet for the case