An Fightstick case made of acrylic.
The feature is that you can prepare the necessary parts and customize it to your liking.
You can choose from a wide range of options, from the layout of the top plate to the height of the side panels.
You can easily create your own original Fightstick!
Size is 395mm x 230mm (W x D) Height is variable depending on options.
The top and bottom are made of two layers of 3mm and 5mm, allowing you to insert printed artwork.
*You will need to assemble it by yourself. Only the case is sold.
Buy artwork and FIGHTSTICK at the same time and get 20% discount on artwork.
If your artwork is ready, it's a great deal to buy at the same time.
After adding FIGHTSTICK to your cart, you can add your ZERO ONE FIGHTSTICK custom art order to your cart.
You can purchase with a 20% discount at the time of payment.
If you buy a Bundle set, you get 5% discount on all the parts you need.
If you purchase it as a Bundle set, you can freely combine the parts required for assembly without hesitation,
and you can purchase it at 5% off.
For those who want pre-assembled, there is also a [FULLY ASSEMBLED] Bundle set.
Matte textured black panel configuration
The ZERO ONE is constructed in matte black and comes with clear panels on the top and bottom to sandwich and protect your artwork.
The black panels are constructed of 5mm acrylic, while the clear top and bottom panels for artwork are 3mm panels.
Layout Options
You can choose from four layouts.
In addition, since only the top plate is sold individually, the layout can be changed simply by replacing the top plate without having to repurchase the case.
 |
 |
| VEWLIX | Noir |
 |
 |
| VEWLIX EXTENDED | KOREAN NOIR |
VEWLIX EXTENDED
In the normal VEWLIX, the lever and the position of the button were too close for the person with a large hand, and various inconveniences occurred.
In order to solve these problems, this is the version that made the distance between the button and the lever hole farther than the normal VEWLIX.
Buttons and distance between buttons are the same as normal.
KOREAN NOIR
Crown and IST Korean levers require a 35 mm lever hole.
It is a NOIR layout that corresponds to them.
If you are using anything other than the Japanese lever, please select this.
Side panel size
| Side panel | width | depth | height |
| 40mm | 395mm | 230mm | 56mm |
| 45mm | - | - | 61mm |
| 50mm | - | - | 66mm |
Select the height of the side panel by the levers and the button that specifies.
40mm:
Sanwa JLF series, Gamerfinger button fits.
Seimitsu LS-32 series,LSX-NOBI-01 seriesCan not be installed.
San-warttan, terminal when using Seimitsu buttonNeed to bend a littlethere is.
As it becomes a low center of gravity, stability will be high.
45mm:
It conforms to the general Seimitsu lever. (LSX-NOBI-01 seriesIt is also acceptable)
Of course you can also use Sanwa JLF series.
Gamerfinger, Sanwa, Seimitsu, all buttons are available without any problems.
Standard height.
50mm:
Korea lever, for Golden Lever.
Otherwise, in the direction of thinking, or thinking about special use.
Bit Bang Gaming Player LED Option
Player LEDs By connecting to (sold separately) with the BROOK FIGHTING BORD series,
When connected to a console such as PS4, connection positions such as 1P and 2P can be displayed visually.
Top Panels provide 3 mm laser cut options optimized to use the Light pipe of Player LED.
All models can use this option, but all clear models do not necessarily require this option.
By selecting the option, four holes are opened at the center of the panel at the center of the panel in all models.
Do you want to use PS4 + Audio / Neutrik?
Normally, the hole for USB mounter on the side panel is 21mm.
This is because it is designed to use USB-C to A mount jack.
However, if you want to use Brook PS4+Audio Fighting Bord or NEUTRIK, you need 24mm + screw hole.
If you are considering these configurations, please select "YES" for the "USE PS4+ Aaudio/NEUTRIK" option question.
Accessories
5 acrylic panels for the main body
8 screws for the main body
4 long nuts for the main body
2 sets of screws and nuts for the PCB board
2 spacers for the PCB board
4 plastic feet for the case