ZERO ONE STICKLESS [All-Button] Rev2 Matte Black/Vermilion Case Kit

※ Product image is REV1.

An arcade stick case produced by acrylic.
It is characterized by aligning the necessary parts and can be customized to your own preference.
You can select a rich option from the top plate layout to the height of the side panel.
Easy to create your own original arcade stick!

The size is 395 mm x 230 mm (w x d) height variable by option.
The top and bottom have a two-layer structure of 3 mm and 5 mm.

※ You need to assemble yourself by yourself. It is sold only for cases.
Buttons, PCBs and harnesses are not included.

If purchased with a bundle set, all necessary parts are 5% OFF

Bundle setWhen purchased, you can combine parts necessary for assembly without getting lost, and can be purchased by 5% OFF.
For those who want assembled,[Assembled] bundle setThere is also.

REV2 appeared with fine adjustment of layout

The layout was fine-tuned based on feedback.
For details, refer to the following images.

Rev1	Rev2

Red and black panel configuration

Zero One, which consists of red and black, is a special configuration with top and bottom of the bottom and other vermilions and contrast.
A 5 mm panel is composed of red, and a 3 mm panel is a single-sided matte black panel.

Stickless type

Instead of the flowing joystick lever, all operations are only the Button layout that only works with buttons.
If you want to use the lever later, you can also use lever type by purchasing the top panel.

Side panel size

Select the height of the side panel by the levers and the button that specifies.
40mm:
Sanwa's JLF series, Gamerfinger button fits.
Seimitsu LS-32 series,LSX-NOBI-01 seriesCan not be installed.
San-warttan, terminal when using Seimitsu buttonNeed to bend a littlethere is.
As it becomes a low center of gravity, stability will be high.

45mm:
It conforms to the general Seimitsu lever. (LSX-NOBI-01 seriesIt is also acceptable)
Of course you can also use Sanwa JLF series.
Gamerfinger, Sanwa, Seimitsu, all buttons are available without any problems.
Standard height.

50mm:
Korea lever, for Golden Lever.
Otherwise, in the direction of thinking, or thinking about special use.

Bit Bang Gaming Player LED Option

Player LEDsBy connecting to (sold separately) with the BROOK FIGHTING BORD series,
When connected to a console such as PS4, connection positions such as 1P and 2P can be displayed visually.

Top Panels provide 3 mm laser cut options optimized to use the Light pipe of Player LED.
All models can use this option, but all clear models do not necessarily require this option.

By selecting the option, four holes are opened at the center of the panel at the center of the panel in all models.

Do you want to use PS4 + Audio / Neutrik?

Usually, the Hall for USB Mounter on the side panel is 21 mm.
this is,USB-CTOA Mount JackThis is because it is designed on the premise of use.
However, if you use BROOK PS4 + Audio Fighting Bord or Neutrik, you need 24 mm + screw holes.
If you are thinking of these configurations, select "Yes" in the option of "USE PS4 + AAUDIO / NEUTRIK".

accessories

5 acrylic panels for the main unit
8 screws for the main unit
4 long nuts for the main body
PCB board screw and nut 2 set
2 spacers for PCB board
Four cases for cases