A set of parts that can be customized to your own feeling of the JLF series (* 1).
■ Set contents
· 4 types of spring
· P. S pipe 4 types
· Guide plate + guide chips 4 types
· E-ring 5 pieces
※ JLF lever is not included in the contents
※ It is also possible to attach to the silent Joystickl (JLF-TPRG-8ByT-SK), but the contact between the guideplate is shocked at the time of wearing and the contact of his read switch may not work properly. be careful.
The inside of the guide plate (guide chip) can be removed by defeating the claw inside and pushed as it is.
※ For failure and injury that occurred during installation, we can not take responsibility in our company, so please work carefully.
Please refer to the following article for installation instructions.
Custom Parts Set Installation Guide for JLF Lever
|Load at the beginning of tipping over
||Load when fully tipped over|
JLF-P-5 / Black
Switch pressed part 15.8φ / JFL lever standard
JLF-P-W / white
Switch pressed part 16.2φ / Silent Joystic standard
JLF-P-B / Blue
Switch press part16.45φ
JLF-P-R / red
Switch press part 16.7φ
GTN-VI / Round Guide Chip (Purple)
One-turn commands, etc. can be input smoothly.
GTN-Y / Octagonal guide tip (Yellow)
It is easier to enter in each direction than the standard square.
GTN-R / Square modified type I guide tip (red)
The input feeling is increased due to the firm fit in each of the 8 directions.
GTN-B / Square modified type Ⅱ guide tip (blue)
The different shapes of the up-and-down and left-and-right sides provide a fresh operational feel.
The above four types of 4-standard 4-8 direction guides are included.