The Translucent version of the OBSF-30 series for the standard arcade button.You can remove the button caps and insert the printed artwork.Perfect for ordering the art work prints and cuts!...

It is a standard joystick made by SANWA. Board type joystick lever / flat iron plate / with shaft cover* Balltop is not included.Switching in 4-8 directions can be changed...

The clear version of the OBSF-24 series for the standard arcade button.You can remove the button caps and insert the printed artwork.Perfect for ordering the art work prints and cuts!...

This is a highly resilient quiet lever for the standard JLF series joystick manufactured by Sanwa. Adoption of a reed switch eliminates the tick-tock switch noise characteristic of micro switches.*The...

A set of parts that can be customized to your own feeling of the JLF series (* 1).■ Set contents· 4 types of spring· P. S pipe 4 types· Guide...

Clear version of the LB-35 series. Compatible with JLF series joysticks and SEIMITSU's LS-32 and LS-58 series.

SANWA snap-in type 24mm button.In a typical arcade stick, it is used for option buttons and start buttons.In addition, hitbox is 24mm for the remaining 11 pieces, excluding one up...

This is a 30mm snap-in type button made by SANWA.This is a standard button used on many arcade sticks.In general arcade sticks, the action buttons (punch, kick, etc.) are set...

SANWA snap-in type 24mm button.In a typical arcade stick, it is used for option buttons and start buttons.In addition, hitbox is 24mm for the remaining 11 pieces, excluding one up...

This is the metallic series of Sanwa snap-in type 30mm push buttons.These are the standard buttons used on many arcade sticks.In general arcade sticks, the action buttons (punch, kick, etc.)...

Metallic version of the LB-35 series. Compatible with JLF series joysticks and SEIMITSU's LS-32 and LS-58 series.

Clear version of the LB-35 series. Compatible with JLF series joysticks and SEIMITSU's LS-32 and LS-58 series.

This is the metallic series of Sanwa snap-in type 30mm push buttons.These are the standard buttons used on many arcade sticks.In general arcade sticks, the action buttons (punch, kick, etc.)...

Metallic version of the LB-35 series. Compatible with JLF series joysticks and SEIMITSU LS-32 and LS-58 series.

This is a 30mm snap-in type button made by SANWA.This is a standard button used on many arcade sticks.In general arcade sticks, the action buttons (punch, kick, etc.) are set...

The Translucent version of the OBSF-30 series for the standard arcade button.You can remove the button caps and insert the printed artwork.Perfect for ordering the art work prints and cuts!...

The clear version of the OBSF-30 series for the standard arcade button.You can remove the button caps and insert the printed artwork.Perfect for ordering the art work prints and cuts!...

This is a special production version of SANWA snap-in type 30mm push button in a black rim that is not normally sold. This is a standard button used on many...

35mm balltop made by SANWA. LB-35 is the most commonly used balltop for arcade sticks on the market. It is compatible with JLF series and SEIMITSU joysticks.

This is the metallic series of Sanwa snap-in type 24mm push buttons. In a typical arcade stick, it is used for option buttons and start buttons. In addition, hitbox is...

The Translucent version of the OBSF-24 series for the standard arcade button.You can remove the button caps and insert the printed artwork.Perfect for ordering the art work prints and cuts!...

35mm balltop made by SANWA.LB-35 is the most commonly used balltop for arcade sticks on the market.It is compatible with JLF series and SEIMITSU joysticks.

This is the metallic series of Sanwa snap-in type 24mm push buttons. In a typical arcade stick, it is used for option buttons and start buttons. In addition, hitbox is...

This is a 30mm snap-in type button made by SANWA.This is a standard button used on many arcade sticks.In general arcade sticks, the action buttons (punch, kick, etc.) are set...

This is a 30mm snap-in type button made by SANWA.This is a standard button used on many arcade sticks.In general arcade sticks, the action buttons (punch, kick, etc.) are set...

Metallic version of the LB-35 series. Compatible with JLF series joysticks and SEIMITSU LS-32 and LS-58 series.

Metallic version of the LB-35 series. Compatible with JLF series joysticks and SEIMITSU LS-32 and LS-58 series.

This is a special production version of SANWA snap-in type 30mm push button in a black rim that is not normally sold. This is a standard button used on many...

This is a special production version of SANWA snap-in type 30mm push button in a black rim that is not normally sold. This is a standard button used on many...

This is a special production version of SANWA snap-in type 30mm push button in a black rim that is not normally sold. This is a standard button used on many...